Home Improvement Stack Exchange
Home Improvement Stack Exchange

Questions tagged [particle-board]

52 questions
4
votes
2 answers

Can particleboard subfloor be used as a nail base for 3/4" solid wood strip flooring?

Question: Has anybody out there laid solid oak strip floor over a 3/4" particle board subfloor and lived to tell about it? Basis for question: I did a search on SE and all answers point to pulling it up, block the walls if needed block the edges…
Jack
  • 32,647
  • 1
  • 21
  • 56
4
votes
2 answers

Is my kitchen cabinet door beyond repair?

My cabinet door became damaged as my sister put all her weight on it to pull herself up :-) Repairing the door is very tricky as these cabinet doors are on the kitchen island and the particle board panels they attach to are very thin (only 6/8 of…
Cecilia
  • 49
  • 1
  • 1
  • 2
4
votes
1 answer

How can I repair water damage under the kitchen sink?

I found out that our kitchen water connection had somehow loosened up and was leaking water on the floor underneath the sink. Now the particle board cabinet floor is warped quite a bit. I was thinking about cutting it out and placing a Sintra®…
TornadoKnight
  • 171
  • 1
  • 2
  • 4
4
votes
1 answer

How to seal/stabilize crumbling particle board counter top?

I have a typical laminate kitchen counter top which is built of particle board under the laminate. The bottom edge, at the front where it hangs over the cabinets is bare particle board. The section over the dishwasher is crumbling and releasing wood…
Steve Fallows
  • 873
  • 2
  • 11
  • 18
3
votes
1 answer

Can I use OSB in place of timber as structural element

In few answers I've been advised to reinforce OSB shelf with wooden beam for rigidity over time. Hence interconnected questions: Isn't OSB supposed to be more stable to elements comparing to wood? Isn't that what's all the adhesive in it is…
Gleb
  • 217
  • 3
  • 10
3
votes
2 answers

Filling the seams at butt joins for a perfect paint finish (how do i?)

Hello I make a lot of boxes and do not have the facilities for mitered edges, I always have a visible seam when I make a butt join. I fill it with fine crack filler and it seems to shrink into the seam as it dries, and when I sand it back it is…
Oliver Kellow
  • 151
  • 1
  • 4
3
votes
1 answer

What techniques are used to change the color of a particle board's veneer & edge banding?

I found a piece of particle board that seems to be strong enough to hold an Apple 17 inch monitor, since it has the size and thickness requirements. I'm toying with the idea of changing the color of this wood, but since it's particle board, with a…
makerofthings7
  • 143
  • 4
3
votes
3 answers

Can I use a wood hardener on particle board?

I’m staying a friend’s place for a few days, and being a bit OCD I’ve been fixing the things that I can. But they have kitchen cabinet doors that lift up, and one has ripped out of the particle board frame. My first thought was to put some epoxy or…
Joe
  • 7,246
  • 1
  • 27
  • 45
3
votes
4 answers

Replacement for Ikea backboard

I am trying to move an Ikea Pax closet. And even though I tried to gently remove the backboard (put a stick against the edge from inside along the board and hit the stick so it would distribute the power), it still left all the nails in. I removed…
StanM
  • 170
  • 1
  • 3
  • 13
2
votes
3 answers

How can I repair a torn out cabinet hinge mount?

So the story goes that our roommate (who does not live with us anymore) slipped in the bathroom and somehow managed to break the cabinet door off the wall part of the cabinet. The point is when she pulled the door the bottom hinge tore out and…
Danny
  • 21
  • 1
  • 2
2
votes
2 answers

Can I reset Vanity Top onto particle board with residue caulk?

I bought a big box vanity with sink etc already attached. It was 1/4" off from being flush at the back so I decided to reseat it. Knifed and sawed the thing off then scraped the silicone off the sink/counter top. Problem is, the wood sides are…
user50435
  • 23
  • 2
2
votes
4 answers

MDF (particle board) edge sealing for smooth painted finish

I am working with CNC routers and a lot of MDF, which is great UNLESS you need to paint the edges which are furry in some spots and all open and porus everywhere else. I build plinths that need to be enamel smooth and show no seams or texture…
Oliver Kellow
  • 151
  • 1
  • 4
2
votes
1 answer

How to fix particle board at lock screw (Ikea Effektiv)

What is the right way to fix the particle board around the lock screw of an Ikea Effektiv full size cabinet? The movers seem to have dropped one end and essentially the wood around three of the lock screws has broken: Do I attempt to fix this with…
Glorithm
  • 121
  • 3
2
votes
1 answer

Which kind of board is easiest to work with?

I am building a model for a school and need a material to build it out of. I was wondering which of these three boards are easiest to work with? MDF, Chipboard, Pine or Plywood? The following are the most important in my choice How easy is it to get…
Deep
  • 121
  • 3
2
votes
3 answers

Can I use particle board over wood plank flooring to smooth it out for laminate flooring?

I need some help! I live in a prewar building, I am looking for a cheap and easy way to install a 10mm floating laminate floor. I ripped up the old carpet to find 1inch wood plank subfloor. The floor boards are squeaky and loose. I secured and…
Chris
  • 21
  • 2
1
2 3 4