Questions tagged [vanity]
97 questions
7
votes
7 answers
Can p-trap be installed higher than drain entry?
I have p-trap entry in drain at 16" above the floor. However, vanity that I got has lower drawer which has top at about the same height. There is also about 4" clearance behind drawer.
I was told that the only way to install p-trap would be to cut…
Uncle Meat
- 946
- 5
- 17
- 30
6
votes
4 answers
How can I determine if a mirror is tempered glass or not?
I have a full wall vanity mirror (70" x 42") in my bathroom wall. I need to drill some holes through it in order to install a vanity light. I realized that if the mirror is made from tempered glass it might shatter completely if I try to drill on…
Jose Cifuentes
- 219
- 3
- 9
6
votes
2 answers
How can I remove a cement-welded sink trap?
I could use some help figuring out how to remove the trap under my bathroom sink from the wall. It looks like all the connections from the trap are unthreaded connecting to the outlet/wall.
I've removed both the nut at the top of the p-trap and the…
Ramy
- 163
- 1
- 4
5
votes
2 answers
How to fix unevenly stained maple wood vanity?
My bathroom vanity was not properly stained. It is not even. The edges are still showing the original light maple color. There are paint-like drips everywhere. I doubt that it has been sealed because it feels rough.
What would be the best way to…
JoJo
- 429
- 4
- 13
- 22
5
votes
3 answers
Installing a 48" vanity between two walls that are 51" apart. How can I cover the 1.5" gaps on the cabinet marble top and the cabinet sides?
Here is the space where my vanity will go. The vanity i'm planning on purchasing is below. How can i fill the gaps on the face and on the top?
ndnchapathi69
- 59
- 1
- 3
5
votes
2 answers
How can I add a second light to my bathroom circuit?
I am new to the forum and this is my first major project.
I am looking for some help for adding a vanity light above my sink, and wiring it to the existing switch that controls the ceiling light so that both the vanity and ceiling light turn on at…
luis enrique guzman
- 91
- 3
4
votes
7 answers
Can a bathroom vanity be installed higher than 30 inches?
"Standard" bathroom vanities are 30", where as kitchen counter tops are typically 36".
For me (6' tall), the 30" vanity is rather low. Is there any reason to leave vanities that height, or can they be installed higher? Is there any practical…
gregmac
- 28,726
- 15
- 82
- 159
4
votes
2 answers
How can I remove a granite countertop from a wooden vanity?
I recently purchased an inexpensive bath vanity from the Home Labyrinth. It included a low-end granite top that is not properly sized for my bathroom. Unexpectedly, out of the box, the granite is sealed to the wooden top of the unassembled vanity. I…
user685673
- 141
- 1
- 1
- 2
4
votes
3 answers
What adhesive is typically used to "glue" a porcelain under-counter sink to a stone countertop
Is it silicone adhesive that kitchen and bathroom remodelers use to "glue" a porcelain sink to the underside of a granite countertop around the perimeter of the cutout? Something else?
P.S. I know there's also a kind of screw attachment; I'm…
mr blint
- 996
- 10
- 24
4
votes
1 answer
What is the point of extra T pipe under my vanity?
I noticed there is an extra T pipe under my vanity for cold water. It goes to basement and it looks like there is a hole in it as well. I cannot understand what does it do? It looks like there is constant water that goes inside it (I can see it from…
Arashsoft
- 143
- 4
4
votes
2 answers
How do I fix/fill this void left by previously tiling around a bathroom vanity
Previous home owners tiled around a vanity, then the vanity needed to come out. Now this void approximately one inch deep is left, and we want to fill it and retile so we can use a wider variety of vanities. How do we level the floor under the tile,…
user3.1415927
- 452
- 6
- 16
3
votes
1 answer
How to rough bath sink drain to maximize drawerspace
I am roughing in the plumbing for a bathroom sink that I am going to build a vanity for. I'd like to have the drain only impact a top drawer and take up as little space as possible. The drawer back will wrap around the plumbing. How close can the…
user38323
- 31
- 1
3
votes
4 answers
How can I install a vanity over this unfortunate plumbing?
I have recently removed a vanity from my bathroom and am facing an unfortunate plumbing footprint when trying to put a new vanity in place.
The cold water line runs right against a built in cabinet which I would like to keep in place and the drain…
Jebadiah
- 31
- 1
- 1
- 2
3
votes
1 answer
How can I join two solid surface vanity tops for a seamless appearance?
I purchased two Swanstone solid surface vanity tops for my double-bowl sink. I trimmed them to site side-by-side and planned to use white silicone caulk between them to fill any very small gaps. They looked fine going in but the caulk sunk some…
Ethereal
- 845
- 6
- 13
3
votes
1 answer
New Vanity doesn’t allow proper distance for p trap
We are installing a new vanity & my husband said it won’t work due to the bottom shelf coming up too high. I have 0 knowledge when it comes to plumbing so maybe he’s right but I’m hoping there’s a work around. I’m attaching a picture to help.
What…
user159346
- 31
- 2