0

I'm using Windows 10.

Accidentally the user with admin rights is deleted.

Now everytime i need to install something or do something else , the user account control window is showing , but there's no yes button , only No. so i can't do anything.

How to fix this ? Thank you !

alex
  • 981
  • 2
  • 12
  • 18
  • Check user account control setting, it may be set to high which will cause this. – Moab Oct 12 '22 at 00:27
  • @Moab No it;s not set to high. The problem that i've described begins after accidentally deleted the admin user. so no there;s only a normal user in system ( of course there;s the built in administrator but it's disabled and i cannot enable it because uac window is showing without yes button , only NO. – alex Oct 12 '22 at 01:04

1 Answers1

0

(A) Add a user, restart in Safe Mode and see if you can add the user to the Admin group.

You can enable the normally disabled Administrator to do this.

Also try these steps:

Quick guide: Enable administrator account in Windows 10
Open “Run” with [Windows] + [R].
Type “cmd” and press [Ctrl] + [Shift] + [Enter].
Type “net user administrator /active:yes”.
The administrator account is now activated.
To deactivate: “net user administrator /active:no”.

You need to login as Administrator when done

Enable built in Admin Account

Enable: Search for cmd in the taskbar search field > select Run as Administrator.
Type net user administrator /active:yes, and press enter. Wait for the confirmation and restart.
To disable, open the command prompt as an administrator and enter net user administrator /active:no

===============

(B)

If all the above fails, then back up the machine and reinstall Windows fresh.

John
  • 46,167
  • 4
  • 33
  • 54
  • How can i enable the built in Administrator , the User account control windows is showing and there's no yes button ? and also to add a user , the uac is showing again. – alex Oct 11 '22 at 22:48
  • Did you read the entire article I posted? – John Oct 11 '22 at 22:51
  • I added another set of steps near the beginning of my answer - try those steps. – John Oct 11 '22 at 22:54
  • Yes , but i can;t add a user , i can't enable the built in Administrator and i can't open command prompt with Run as Administrator.. On all of these actions the UAC window is showing and there;s no yes button to confirm. – alex Oct 11 '22 at 22:54
  • It appears you will need to back up the machine and reinstall Windows – John Oct 11 '22 at 22:55