Can these violins be used without their control box, i.e. just plug the violin directly into my amp/pre-amp pedalboard (just like the YEVs)?
Asked
Active
Viewed 446 times
0
-
As Alphonso's answer suggests, so long as you have proper impedance matching, any preamp is acceptable. – Carl Witthoft Jun 29 '20 at 13:35
2 Answers
4
The control box for the Yamaha appears to be a pre-amp with EQ, DI, and headphone amp. To be honest, it looks like a pretty good addition to the instrument.
To answer your question, The instrument has two piezo pickups in it and the output signal should be the pickups sent through a blend circuit, which would let you plug it into any amp, pre-amp, or effects unit built to take instrument input.
There are other manufacturers of D.I. and EQ units designed for Piezo pickups, and you can build a completely different tone to the instrument using different combinations of pre-amp and effects.
I have a cheap electric violin that I found sounded much better when the built in pre-amp and EQ unit failed and I wired the pickup out direct.
Alphonso Balvenie
- 7,341
- 16
- 27
1
You surely can, however as the control box is acting a D.I. the sound will be better with the control box (and equalized, as a bonus)…
Tom
- 4,509
- 1
- 14
- 41