Questions tagged [transition]
79 questions
7
votes
2 answers
Cutting a Custom Threshold: Best Tool for the Job?
I am in the process of creating a custom threshold to go from a tiled surface down to a carpeted surface. The tile is about an inch above the carpeted floor, so I decided to make a custom threshold in order to introduce a nice slope. This should…
BrosephRoseph
- 173
- 1
- 6
6
votes
2 answers
How to install baseboard at the transition between floors with different height?
Recently I replaced the carpet with engineered floor. However, now I met the difficult to install the baseboard between the two floors with different height.
See the picture:
I don't know what's the standard way to handle such scenario beautifully.…
limi
- 241
- 4
- 6
- 9
6
votes
5 answers
How can I install T molding on concrete subflooring?
I'm at the point where I want to install some T molding for the transition from our main room to the bedrooms. I just took a look at the directions and they only show screwing the track into the subflooring. Right now I only have the moisture…
SwDevMan81
- 449
- 5
- 10
- 19
6
votes
1 answer
How can I fix an uneven and damaged transition from drywall to tile in the bathroom?
We recently replaced some old, cracking shower walls in a bathtub area with tile. Looks great. However, on one wall the drywall next to the tile bows out so it's not even with the tile in the middle section of the wall. That drywall edge also was…
Voodoo
- 251
- 4
- 7
5
votes
1 answer
Should I use a carpet kicker or stretcher?
I recently retiled my master bathroom. Our bedroom has carpet and I need to stretch the lay the carpet adjacent to the marble transition. For this small space would it be best to use a kicker or carpet stretcher? Please keep in mind that this area…
rynmrtn
- 349
- 2
- 5
- 11
4
votes
1 answer
What clamp to use to transition from 1950s-era fabric-jacket NM?
Our doorbell transformer is powered via an original 1950s-era fabric jacketed 2-conductor NM (internal conductors are plastic-jacketed). Photo below shows that NM leaving electrical box; doorbell transformer is sitting out in the open on a wooden…
Armand
- 3,834
- 5
- 22
4
votes
1 answer
How can I transition from carpeted stairs to an engineered hardwood floor?
I want to replace the carpet in my bed rooms(actually the whole 2nd floor) with engineer hardwood floor. The stair is from 1st floor to 2nd floor which will keep carpet. But I can't imagine how/where I need to do the transition. I don't have any…
limi
- 241
- 4
- 6
- 9
4
votes
5 answers
Should I run laminate continuously through rooms, or separate with T moulding?
I am installing laminate flooring in an area that has two bedrooms and a living area. The bedrooms are about 150 sq ft each and the living space is around 250 sq ft.
--------------- -----------------------------
| | | …
SwDevMan81
- 449
- 5
- 10
- 19
3
votes
2 answers
What - if any - annual maintenance is required for grout/caulk in a shower?
I'm a new home owner who has been living in house that was built last year. Upon moving in the builder mentioned that grout needed yearly maintenance--would he referring to re-sealing the grout? Are there other types of maintenance involved for tile…
johnhforrest
- 133
- 5
3
votes
1 answer
How to caulk stone backsplash to granite countertop?
My kitchen has a stone backsplash and granite countertops. In some places there is a gap between the two, as illustrated below.
I would like to seal this gap to prevent moisture from getting behind the wall. Is a silcone-based kitchen caulk…
DrewCo
- 133
- 1
- 4
3
votes
2 answers
How do I transition between tile and drywall in a tub surround?
I'm working on a tub surround, which is about to be tiled. And the last piece I need to figure out, is how to transition between finished tile and adjacent wall.
This is how my wall looks right now.
Backerboard is 1/4", and drywall is 1/2". With…
Serge
- 283
- 2
- 5
- 11
3
votes
6 answers
Top of stairs wood tread to carpet transition level issue
I'm doing a DIY project converting my carpeted stairs to stained 1" think red oak treads and painted poplar risers. My issue is at the top of the stairs where I'm placing a narrow stair tread, this stair tread then transitions to carpet. This top…
Ken
- 31
- 1
- 1
- 2
2
votes
2 answers
How do I transition from a wood floor to tile that has a 1-1/4" height difference?
I have three of these transitions that I need to do something about. I thought I would be able to buy a reducer but them seem to top out around 3/4". After doing some more research it seems that I would need a ramp in this situation?
Is there…
evolvd
- 143
- 1
- 1
- 7
2
votes
5 answers
How can I create an "invisible" transition between different flooring types?
I am looking for a flooring transition for tile to hardwood, tile to laminate, and laminate to hardwood. I really do not like the transitions that are raised above the rest of the floor. All of the flooring in my house is exactly flush when it…
user20836
- 21
- 1
- 1
- 2
2
votes
2 answers
How can I affix this wood transition piece?
I made a perfect looking transition to go from wood floating floor to tile for a bathroom. Problem is that this is where the old marble transition was. Can I set the transition with mortar? If not what can I use? Right now there is a one inch…
DMoore
- 47,296
- 15
- 79
- 187