Questions tagged [footings]
114 questions
8
votes
2 answers
Can I support 6x6" deck posts on 10" diameter poured concrete footings?
I am building a new 13x10 deck. So far I have the ledger board in place, and yesterday I finished building 3 concrete footings, 9 ft away from the ledger board. I use tubing, 36 inch deep with gravel on the bottom (30 inch tube+ 6 inch gravel, as…
Max M
- 125
- 1
- 1
- 8
7
votes
4 answers
How will concrete fill in?
So I am pouring some footings for a deck I am building and my current plan is to dig a hole that is 18" wide and 18" deep. I'm then going to suspend a sonotube about 6 inches above the bottom (using a scrap wood frame).
My idea is to pour concrete…
Brh
- 881
- 4
- 13
- 23
7
votes
3 answers
What can I do about a Rough opening that is REALLY out of square?
The house I am living in has a rather interesting problem. Due to what I suspect was Jack Daniels building inspections in this town in the 80's, the footing wall under the second floor dining room looses about an inch across 9 ft. The kitchen to…
MiltonMan
- 71
- 1
- 2
7
votes
2 answers
How can I efficiently dig small footing holes?
I am trying to dig holes that are 18" square, and 12"+ deep.
The site is mostly undisturbed soil, although there is a thin layer of topsoil or fill in some areas. The soil is glacial till, so a mix of sizes. Plenty of rocks.
I use a mattock to…
Jay Bazuzi
- 11,658
- 32
- 94
- 143
7
votes
5 answers
How/where can I find out what the frost-line is for my area?
Aptos, CA, United States
What service or documentation resource can I use to determine what the frost-line is for my area? I'd be inclined to ask the county building/planning office but I suspect that they'll want to charge for answering a…
Mike B
- 8,011
- 53
- 107
- 147
6
votes
2 answers
What are some tips for tamping gravel?
I'm packing medium-sized gravel (1.5"-minus crushed rock) in to holes, to provide a stable base for pier blocks in clay-rich soil. There are 30 holes, roughly 24" diameter, 18" deep.
I have a 10" x 10" hand tamper, but my carpenter friend said that…
Jay Bazuzi
- 11,658
- 32
- 94
- 143
6
votes
1 answer
Is this basement footer going to cause issues?
I'm having an addition put on my house with a full basement. The contractor poured the footer and is getting ready to do the foundation walls. He marked the lines for the walls, and I couldn't help but notice that one corner is cutting it very close…
djs
- 191
- 6
5
votes
2 answers
Should I pour a footing and pier at the same time?
I am pouring concrete for deck footings. I need an 18in diameter footing to carry the weight, and I will also use a 8 in diameter pier to bring it to an inch above ground. The footing must be 30 in below ground and 8 in thick. I am going to use a…
Michael
- 909
- 8
- 16
- 24
5
votes
2 answers
How should I build the concrete footings for my deck?
I plan on making a small deck and I live in Howard County Maryland. The deck code here says that the concrete footing must be 30 in below ground level and have a thickness of at least 8 inches (i.e. to 22 inches below ground level). This which…
Michael
- 909
- 8
- 16
- 24
5
votes
2 answers
Recommended footings for deck built on rock with 5-10% grade?
I'm looking to install a 30' decking platform (for a yurt), 3' above grade, on a plot of land I own. The site has a mild grade (5-10%), made up of metasedimentary rock, with ~1" of organic matter at the surface (not enough to dig into). What…
inneedofadeck
- 53
- 3
5
votes
2 answers
How do I run the PVC conduit into a garage with a ground-level foundation?
I need to run conduit underground to a new garage. My problem is I don't understand the proper way to run the 2in PVC conduit outside to the sub panel. The wall sits on a 3ft 8in stem wall. The top of the footing is at grade level. It extends from…
Ray S Pierce
- 51
- 3
4
votes
2 answers
Adding rebar to deck footings and piers?
I've heard a few people mention adding rebar to deck footings and piers to make them stronger, but I haven't been able to find any details on how exactly to do this.
Is it sufficient to just hammer 3 or 4 pieces of rebar into the bottom of my hole…
Brh
- 881
- 4
- 13
- 23
4
votes
5 answers
Retaining wall: footing or no footing?
I'm looking to build a retaining wall on my sloped backyard. I'll be using cinder blocks (with mortar to join them together and rebar for added stability).
(added info: at the lowest point the wall is going to be close to 4 feet tall, not counting…
ttothec
- 191
- 1
- 2
- 5
4
votes
2 answers
What can I fill a trench around my house with to avoid creating a drainage issue?
I am planning out my footing insulation job. Right now it's a pretty standard floating slab-on-grade with footings extending down a few feet, and the footings are uninsulated. A ring of concrete was, at some later point, poured around the original…
iLikeDirt
- 12,397
- 17
- 49
- 90
4
votes
1 answer
How do I determine the correct rise of a step for a concrete footing on a slope?
Going to be building a retaining wall in the front yard on a slope. I'm going to be using King size residential bricks to make a 2 wythe wall. Because of the slope I'll need to have 3-4 steps in the concrete footing and was planning that the rise of…
TugboatCaptain
- 1,230
- 3
- 14
- 22