5

What are the advantages and disadvantages of both systems of joints for "non-pressure" pipes that are buried?

O-ring joints are more expensive, but easier to do on buried pipes.

Glue on the other hand is permanent (that is a plus and a minus at once).

What else?

auujay
  • 5,215
  • 14
  • 37
  • 55
Luiz Borges
  • 2,305
  • 14
  • 65
  • 80

2 Answers2

1

Typically, o-ring fittings are used for larger diameter pipes (4 inch and larger) where the runs consist of longer distances with a low density of fittings. Examples would be outside of the building civil work and inside (below grade) storm drainage.

When you have smaller diameter pipes and a high density of fittings, such as a bathroom group, glue fittings would be used.

Some advantages of o-ring fittings are:

  • fittings can be reused
  • quicker to install for large diameter pipes (> 6")
  • no time constraint for adjustment of fittings

Some advantages of glue fittings are:

  • fittings stay in the place they were set to
  • available for small diameter pipes
  • quicker to install when there is a high density of fittings
pdd
  • 5,106
  • 13
  • 26
  • Is there any problems on using o-rings with a high density of fittings and 100mm pipe (4 inches)? Ex: a pipe moving from vertical to horizontal (90° curve), changing direction (45° curve), joining other pipe (Y junction) and then connecting to inspection boxes all in a short run? – Luiz Borges Dec 28 '12 at 18:53
  • 1
    No problem, glue is just easier as you don't have to deal with pushing the jacketed fittings together which can take some pressure. You should confirm that the pipe/fitting material is approved for your application with your local code. – pdd Dec 28 '12 at 19:43
0

As a licensed civil engineer, I would add that longer straight runs would be better with gasketed pvc (probably only available in +4" sizes) due to thermal expansion.

TEPPE
  • 1