How to make IP forwarding permanent?

Question

I know that I can enable IP forward by echoing 1 to /proc/sys/net/ipv4/ip_forward, but how can I make this permanent?

By the way I want another method rather than start up scripts, is there any?

score 76 · Accepted Answer · edited Mar 26 '15 at 16:10

76

Edit /etc/sysctl.conf and search for the following lines:

# Uncomment the next line to enable packet forwarding for IPv4
#net.ipv4.ip_forward=1

Uncomment net.ipv4.ip_forward=1:

# Uncomment the next line to enable packet forwarding for IPv4
net.ipv4.ip_forward=1

Or in one line command :

sudo sysctl -w net.ipv4.ip_forward=1

edited Mar 26 '15 at 16:10

boly38

223
2
5

answered Jun 21 '13 at 13:51

Eric Carvalho

53,609
102
137
162

14

`sudo sysctl -w net.ipv4.ip_forward=1` doesn't make it permanent... @ least on a raspberry pi I tested... – Philippe Gachoud Oct 22 '17 at 15:37
do you need to reboot too? or is there a way to "live" apply it too – user230910 May 25 '18 at 21:38
@user230910 No need to reboot if using `sudo sysctl -w ...` – Eric Carvalho May 29 '18 at 15:51
2

`-w` immediately enables the setting. It does not make it persistent though! – ws6079 Apr 27 '20 at 13:26

score 24 · Answer 2 · edited Jun 21 '13 at 20:20

Permanent setting using /etc/sysctl.conf

If we want to make this configuration permanent the best way to do it is using the file /etc/sysctl.conf where we can add a line containing net.ipv4.ip_forward = 1

/etc/sysctl.conf:
net.ipv4.ip_forward = 1

If you already have an entry net.ipv4.ip_forward with the value 0 you can change that to 1.

To enable the changes made in sysctl.conf you will need to run the command:

sudo sysctl -p /etc/sysctl.conf

On RedHat based systems this is also enabled when restarting the network service:

service network restart

and on Debian/Ubuntu systems this can be also done restarting the procps service:

sudo /etc/init.d/procps restart

Source: How to Enable IP Forwarding in Linux

score 2 · Answer 3 · answered May 13 '21 at 14:40

2

If you need to enable it in script you can use commands below to enable

sed -i 's/#net.ipv4.ip_forward=1/net.ipv4.ip_forward=1/' /etc/sysctl.conf
sysctl -p

or disable:

sed -i 's/net.ipv4.ip_forward=1/net.ipv4.ip_forward=0/' /etc/sysctl.conf
sysctl -p

answered May 13 '21 at 14:40

ilya

19
1

I think there is a typo in the command line to enable: the idea is changing the value 0 for 1 so it should be: `ed -i 's/#net.ipv4.ip_forward=0/net.ipv4.ip_forward=1/' /etc/sysctl.conf sysctl -p` – Pablo Adames Dec 14 '22 at 02:20
No. Enabling command just remove "#" in the beginning. So there is no typo – ilya Mar 24 '23 at 20:58
[ilya](https://askubuntu.com/users/1096080/ilya), you are correct, I will take back my comment. I missed that the target was to remove the # alone. Instead, I thought of matching an uncommented line with the disabled setting of 0 to change it to the enabled value of 1. – Pablo Adames Mar 30 '23 at 06:28

How to make IP forwarding permanent?

3 Answers3

Linked