Boot error > no such device: grub rescue

Question

After an installation of Ubuntu 12.04, erasing an old partition with Ubuntu 10.10, I can't get grub to load. I can't access my Windows 7 partition either

I get the message:

> error: no such device: 58ABF29C...  
grub rescue>

I suppose my master boot record got erased/corrupted. How can I check and fix this?

If your MBR were erased, GRUB would not run at all. What is happening here is that the MBR code is running, and has been told to look on the partition with the UUID of 58abf29c... for the configuration menu. Most likely, this was the partition you erased, so it doesn't exist anymore. The easiest way to fix it would be to download the [grub boot repair CD](http://sourceforge.net/p/boot-repair-cd/home/Home/), which will probably fix it automatically. — Marty Fried, May 29 '12 at 16:22
A complete answer is here http://askubuntu.com/questions/125428/grub-complains-of-no-such-partition-after-installing-1204 — Bryce, Nov 11 '13 at 17:58

score 25 · Accepted Answer · edited May 29 '12 at 15:20

25

Re-install your GRUB.

Boot using a live cd of ubuntu.
Open a terminal and run the command
sudo fdisk -l
It lists the complete partition table of the hard disk. In there, identify which partition you have got your linux installed on. You can identify it using the drive size you had allocated for it and looking at the last column of the output which will be extended or Linux for all of your linux partitions. The partition will most probably be something like /dev/sda5 or something. Remember this partition.
Create a temporary folder in your home directory (Note: You can make the temporary folder anywhere you want. I’m using the home folder just for the sake of explanation). I’m calling it temp for now. So that temp folder’s path will be/home/ubuntu/temp`.
Mount your linux partition there. That is, assuming that you found your linux partition to be /dev/sda5, you mount that at the temp folder by doing the following command

sudo mount /dev/sda5 /home/ubuntu/temp
If you want to check whether you have mounted the correct partition, go to your home folder and open temp. You will be in the / directory. In there you will find home, in which your home folder’s name will be there. Once you’ve confirmed you have mounted the correct partition, do step 6.
You have to install grub by showing the system where to read the data from the hard disk at the beginning. Don’t worry, just run the following command

sudo grub-install --root-directory=/home/ubuntu/temp /dev/sda

The /dev/sda corresponds to your hard disk name. Replace it by whatever the command sudo fdisk -l command showed you.
You’re done. You may restart your system.

edited May 29 '12 at 15:20

Anwar

75,875
31
191
309

answered May 29 '12 at 12:45

harisibrahimkv

7,216
11
44
71

wnen I run the mount command I get the following error: mount: you must specify the filesystem type – andandandand May 29 '12 at 14:29
I did sudo mount /dev/sdb2 /home/ubuntu/temp, the partition appeared as "Extended" with fdisk -l – andandandand May 29 '12 at 14:42
1. Are you sure sdb is is your hard disk's name? Confirm that. 2. /dev/sdb2 might be your logical partition container and not the partition in which you installed '/'. So try sdb3 or an other partitions that you have on your system. – harisibrahimkv May 29 '12 at 14:44
/dev/sdb2 is marked as Boot and appears with filesystem "Extended" in fdisk -l – andandandand May 29 '12 at 15:00
/dev/sdb is plausible too, as it has 40 GB, but it doesn't specify "Extended" or is marked as boot, when I try to mount /dev/sdb I get: mount: /dev/sdb already mounted or /home/ubuntu/temp busy – andandandand May 29 '12 at 15:04
/dev/sdb7 appears with System "Linux", not "Extended" and allowed me to mount it.. – andandandand May 29 '12 at 15:05
Cool. Check the contents inside it. If you find the folders 'var', 'boot', etc in there, then that's what we need. – harisibrahimkv May 29 '12 at 15:08
On the command sudo grub-install --root-directory=/home/ubuntu/temp /dev/sda There's a space between temp*space*/dev/sda, is that space intentional or a typo? Does it matter? – andandandand May 29 '12 at 15:11
That space is needed! – harisibrahimkv May 29 '12 at 15:14
/usr/sbin/grub-setup: error: will not proceed with blocklists :( – andandandand May 29 '12 at 15:21
That is weird. I'm reaching my limit here I guess. Do refer to the following. It might help you: http://ubuntuforums.org/showthread.php?t=1769391 – harisibrahimkv May 29 '12 at 15:26

score 4 · Answer 2 · edited Sep 27 '12 at 15:15

4

I had the same problem while upgrading 10.10 to 12.04 on an ASUS EEEPC.

Previously, I had / mounted on the 4GB disk and /home on the 12GB disk. The latest Ubuntu needs at least 4.8GB in /, so I needed to swap the mount points.

I fixed the problem by changing the hard-disk boot sequence in my BIOS settings.

edited Sep 27 '12 at 15:15

Peachy

7,077
10
37
45

answered Aug 31 '12 at 22:16

fisharebest

141
2

score 1 · Answer 3 · answered Sep 12 '12 at 03:17

I had this same problem when I created my /boot as a RAID 1 mirror on Mint 13.

Solved, by using the install CD to boot back into the system. Then re-mount my drives and chroot into the installed system:

apt-get install mdadm lvm2

Not sure if this is really needed but I then did:

grub-install /dev/sda
grub-install /dev/sdb
update-grub

Boot error > no such device: grub rescue

3 Answers3

Linked

Related